Products

Epoxy Floor Coating

822M EPOXY FLOOR MID-COAT

Epoxy Floor Mid-Coat
Download

General Information:

Epoxy Floor Mid-Coat 822M is based on epoxy resin and special color pigments, antioxidants and alkalis to form a 2- component mid-coat for the concrete floor. Anti-chemical and anti-corrosion, tough film thickness. Film thickness has high hardness, good mechanical strength, and anti-wear. High gloss, no cracking, water-proof, good adhesion and easy to clean

Suitable Use:

Suitable for application as mid-coat for floor paint

Characteristics:

1. Excellent mechanical and abrasion resistance
2. Anti-chemical and corrosive
3. Good adhesion
4. Easy surface cleaning
5. High gloss

Specification:

1. Viscosity: ≥ 70 KU (25°C)
2. Theoretical coverage: 1.3 ± 0.1 kg/m(dry film thickness: 1 mm)
3. Drying time:

(H:hours, D: days) 5°C 20°C 30°C
Set to Touch 24H 7H 5H
Dry Hard 72H 24H 20H
For Overcoat (Min.)         3D                2D                  1D         
For Overcoat (Max.) 4D 3D 2D
Pot life 90mins 50mins 30mins

4. Density: 1.3 ± 0.05 g/ml
5. Volume solid: 99 ± 1 %
6. Mixing ratio ( by weight) A : B = 4 : 1
7. Solvent: no solvent
8. Color: no color
9. Recommended painting road: 1 layer
10. Packing: 21.61 kg/set, 4.32 kg/set

Directions for Use:

1. Surface preparation:
- The surface should be flat and dry sufficiently
- Remove oil, moisture, dust, paint and other contaminants from the surface to be coated

2. Preparation of paint:
- Stir to be mixed uniformly before use
- Keep correct mixing ratio and add hardener to base

Storage instructions:

1. Valid: 12 months
2. Note: this product must be stored in a cool dry and ventilated place, and avoid direct sunlight, away from the fire

Cautions:

  1. The main substance and the hardener must be proportionally blended, stir evenly the mixture before use. Recommend to use before the pot-life is over
  2. Remove all oil, grease, water, and dust from the substrate
  3. This product is inflammable and should keep away from heat and fire
  4. During the application, the work site should be ventilated and avoid direct contact with skin and eyes. For more information, please refer to MSDS
  5. The ambient temperature must not below 5°C or the relative humidity less than 85%
  6. The main substance and hardener should be tightly closed and stored in a cool place when it is in use
  7. Epoxy floor coating under direct sunlight may fade away or  discolor 

 

 

© Copyright NOROO-NANPAO, All rights reserved 
® NOROO-NANPAO giữ bản quyền nội dung trên website này

Login