Epoxy Floor Coating


Solvent-type Epoxy Top Coat

General Information:

Based mainly on epoxy resin, combined with modified polyamide pigments, acid, and alkali resistant to form 2K anticorrosive epoxy coating. Excellent adhesion, anti-rust, anti-corrosive and durability. The film with excellent toughness, hardness, and abrasion resistance. Excellent solvent and oil resistance, anti-acid, anti-alkali, resistance to salts and moisture

Suitable Use:

Suitable use for protection metals of machinery, anti-corrosion for wastewater treatment tank, chemical plants and steel structure


1. Excellent adhesion, corrosion and rust resistance
2. High toughness, hardness; and abrasion resistance
3. Good tolerance to solvent, oil, acid, alkaline, salt and moisture environments


1. Viscosity: 75 - 85 KU (25°C)
2. Theoretical coverage: 0.1 ± 0.05 kg/m2 (dry film thickness: 0.04 mm)
3. Drying time:

(H:hours, D: days) 5°C 20°C 30°C
Set to Touch 12H 7H 5H
Dry Hard 72H 48H 30H
For Overcoat (Min.)         3D                2D                  1D         
For Overcoat (Max.) 4D 3D 2D
Pot life 8H 6H 5H

4. Density: approx. 1.25 ± 0.051 g/ml
5. Volume solid: 54 ± 1 %
6. Mixing ratio ( by weight) A : B = 5 : 1
7. Solvent: 926D
8. Color: colorful
9. Packing: 19.2 kg/set, 3.84 kg/set
10. Recommended painting road: 1 - 2 layers

Directions for Use:

1. Surface preparation:
- The surface should be flat and dry sufficiently
- Remove oil, moisture, dust, paint and other contaminants from the surface to be coated

2. Preparation of paint:
- Stir to be mixed uniformly before use
- Keep correct mixing ratio and add hardener to base

Storage instructions:

1. Valid: 12 months
2. Note: this product must be stored in a cool dry and ventilated place, and avoid direct sunlight, away from the fire


  1. The main substance and the hardener must be proportionally blended, stir evenly the mixture before use. Recommend to use before the pot-life is over
  2. Remove all oil, grease, water, and dust from the substrate
  3. This product is inflammable and should keep away from heat and fire
  4. During the application, the work site should be ventilated and avoid direct contact with skin and eyes. For more information, please refer to MSDS
  5. The ambient temperature must not below 5°C or the relative humidity less than 85%
  6. The main substance and hardener should be tightly closed and stored in a cool place when it is in use
  7. Epoxy floor coating under direct sunlight may fade away or  discolor 



© Copyright NOROO-NANPAO, All rights reserved 
® NOROO-NANPAO giữ bản quyền nội dung trên website này