Epoxy Floor Coating


Self-Leveling Epoxy Floor Coating

General Information:

932 self-leveling epoxy floor coating is based on epoxy resin and special color pigments, antioxidants and alkalis to form a 2 component solvent-free mid-coat for self-leveling purpose on concrete floor. Film thickness has high water-resistance, corrosion resistance and resistance to chemicals

Suitable Use:

Suitable for cement base, abrasion resistance, compression resistance and anti-dust for indoor concrete surface. Protection and decoration function for cement and concrete


1. Excellent water resistance, corrosion resistance and chemical resistance
2. Good gloss, easy to clean
3. Has good adhesion on metal, concrete


1. Viscosity: 85 - 100 KU (25°C)
2. Theoretical coverage: 1.35 ± 0.1 kg/m2 (dry film thickness: 1 mm)
3. Drying time:

(H:hours, D: days) 5°C 20°C 30°C
Set to Touch 12H 7H 5H
Dry Hard 72H 48H 30H
For Overcoat (Min.)         3D                2D                  1D         
For Overcoat (Max.) 4D 3D 2D
Pot life 60min. 40min. 30min.

4. Density: 1.35 ± 0.05 g/ml
5. Volume solid: 99 ± 1 %
6. Mixing ratio ( by weight) A : B = 5 : 1
7. Solvent: no solvent
8. Color: colorful
9. Packing: 24 kg/set, 4.8 kg/set
10. Recommended painting road: 1 layer

Directions for Use:

1. Surface preparation:
- The surface should be flat and dry sufficiently
- Remove oil, moisture, dust, paint and other contaminants from the surface to be coated

2. Preparation of paint:
- Stir to be mixed uniformly before use
- Keep correct mixing ratio and add hardener to base

Storage instructions:

1. Valid: 12 months
2. Note: this product must be stored in a cool dry and ventilated place, and avoid direct sunlight, away from the fire


  1. The main substance and the hardener must be proportionally blended, stir evenly the mixture before use. Recommend to use before the pot-life is over
  2. Remove all oil, grease, water, and dust from the substrate
  3. This product is inflammable and should keep away from heat and fire
  4. During the application, the work site should be ventilated and avoid direct contact with skin and eyes. For more information, please refer to MSDS
  5. The ambient temperature must not below 5oC or the relative humidity less than 85%
  6. The main substance and hardener should be tightly closed and stored in a cool place when it is in use
  7. Epoxy floor coating under direct sunlight may fade away or  discolor 



© Copyright NOROO-NANPAO, All rights reserved 
® NOROO-NANPAO giữ bản quyền nội dung trên website này