Products

Epoxy Floor Coating

933 SELF-LEVELING EPOXY FLOOR COATING

Self-leveling epoxy floor coating
Download

General Information:

Self-leveling epoxy floor coating 933 is based on epoxy resin, combined with special color pigments and other antioxidants and alkalis to form a 2-component epoxy floor coating. Solvent free, no harm to environment and inflammable. The film thickness has excellent acid and alkali resistance, anti-corrosion and resistance to chemicals. The smooth film with excellent toughness, hardness, abrasive and pressure resistance

Suitable Use:

Suitable for chemical facilities, pharmaceutical factory, waste-water treatment and indoor pipeline.

Characteristics:

1. The paint film has high acid and alkali resistance, anti-corrosion, chemical resistance
2. Fine film with excellent plasticity, hardness, abrasion and pressure resistance

Specification:

1. Viscosity: 120 - 130 KU (25°C)
2. Theoretical coverage: 1.5 ± 0.1 kg/m2 (dry film thickness: 1 mm)
3. Drying time:

(H: hours, D: days) 5°C 20°C 30°C
Set to Touch 12H 7H 5H
Dry Hard 72H 48H 30H
For Overcoat (Min.)         3D                2D                  1D         
For Overcoat (Max.) 4D 3D 2D
Pot life 60min. 40min. 30min.

4. Density: 1.5 ± 0.05 g/ml
5. Volume solid: 99 ± 1 %
6. Mixing ratio ( by weight) A : B = 4 : 1
7. Solvent: solvent- free
8. Color: colorful
9. Packing: 24.25 kg/set, 4.85 kg/set
10. Recommended painting road: 1 layer

Directions for Use:

1. Surface preparation:
- The surface should be flat and dry sufficiently
- Remove oil, moisture, dust, paint and other contaminants from the surface to be coated

2. Preparation of paint:
- Stir to be mixed uniformly before use
- Keep correct mixing ratio and add hardener to base

Storage instructions:

1. Valid: 12 months
2. Note: this product must be stored in a cool dry and ventilated place, and avoid direct sunlight, away from the fire

Cautions:

  1. The main substance and the hardener must be proportionally blended, stir evenly the mixture before use. Recommend to use before the pot-life is over
  2. Remove all oil, grease, water, and dust from the substrate
  3. This product is inflammable and should keep away from heat and fire
  4. During the application, the work site should be ventilated and avoid direct contact with skin and eyes. For more information, please refer to MSDS
  5. The ambient temperature must not below 5°C or the relative humidity less than 85%
  6. The main substance and hardener should be tightly closed and stored in a cool place when it is in use
  7. Epoxy floor coating under direct sunlight may fade away or  discolor

 

 

© Copyright NOROO-NANPAO, All rights reserved 
® NOROO-NANPAO giữ bản quyền nội dung trên website này

Login