Products

General Information:

Based mainly on epoxy resin, combined with special color pigments antioxidants and alkalis to form a 2 component midcoat for anti-corrosion purpose. Excellent adhesion, anti-rust, anti-corrosion and high durability. The film has excellent toughness, hardness and abrasive resistance, oil-resistance, anti-acid and alkali, resistance to salts and moisture

Suitable Use:

Suitable use for anti-corrosive and decorative purposes on machinery and equipment. Swimming pool, wastewater treatment tank, chemical factory, food factory

Characteristics:

1. Excellent adhesion, corrosion and rust resistance
2. High toughness, hardness; and abrasion resistance
3. Good tolerance to solvent, oil, acid, alkaline, salt and moisture environments

Specification:

1. Viscosity: 75 - 85 KU (25°C)
2. Theoretical coverage: 0.1 ± 0.05 kg/m² (dry film thickness: 0.04 mm)
3. Drying time:

4. Density: approx. 1.25 ± 0.05 g/ml
5. Volume solid: 54 ± 1 %
6. Mixing ratio ( by weight) A : B = 6 : 1
7. Solvent: 926D
8. Color: colorful
9. Packing: 21 kg/set, 4.2 kg/set
10. Recommended painting road: 1 - 2 layers

Directions for Use:

1. Surface preparation:
- The surface should be flat and dry sufficiently
- Remove oil, moisture, dust, paint and other contaminants from the surface to be coated

2. Preparation of paint:
- Stir to be mixed uniformly before use
- Keep correct mixing ratio and add hardener to base

Storage instructions:

1. Valid: 12 months
2. Note: this product must be stored in a cool dry and ventilated place, and avoid direct sunlight, away from the fire

Cautions:

1. The main substance and the hardener must be proportionally blended, stir evenly the mixture before use. Recommend to use before the pot-life is over
2. Remove all oil, grease, water, and dust from the substrate
3. This product is inflammable and should keep away from heat and fire
4. During the application, the work site should be ventilated and avoid direct contact with skin and eyes. For more information, please refer to MSDS
5. The ambient temperature must not below 5^oC or the relative humidity less than 85%
6. The main substance and hardener should be tightly closed and stored in a cool place when it is in use
7. Epoxy floor coating under direct sunlight may fade away  or  discolor 

© Copyright NOROO-NANPAO, All rights reserved 
® NOROO-NANPAO giữ bản quyền nội dung trên website này